Cisco Meraki MX67 Rack Mount 19in 1U (Modular)3D Printed 19 Inch 1U Rack mount for Cisco Meraki MX67 appliance (Model MX67). Now with a helpful shelf for holding the Power supply and routing the power cable to the front. The appliance slides into the frame from the rear and is securely held in place via a retaining plate. This listing is just for the Mount, any photos showing devices etc are just for example. Does not include Rack Screws, Cage Nuts, or Network equipment. The ModMount range is

ProDesk Mini 400 / 600 G1 - G8

or Network equipment

If you are going to use Fan grills

It comes in a Left and Right side design depending on your needs

Don't see a design for your device in my range

The Home Assistant Yellow slides into the frame from the back after removing the back plate of the mount and the Coral Accelerator slots into the front

This mount also incorporates a 2 Keystone Sockets so you can use Keystone Jacks and Fly leads (Optional Extra) to connect your to Cable Modem from the front panel

The LTE Gateway slides into the frame from the front

this mount was specifically designed to work with the Intel NUC 13 Pro Slim

3D Printed 1RU rack mount for 3x BeeLink S12

TL-FC311B-20 V2

The open space inside the box is: